Contact Us

Sales • Service • Support • Knowledge
Liquidations • Integrity • Since 1941

Bulletin Board

Dustek Dust Collectors ON SALE NOW!

These Dustek dust collectors currently on sale, in stock and ready to ship!

All are 3-phase 230/460v

 

SPECIAL PRICES:

C300:  $4,130.00

C500:  $4,460.00

C1000:  $5,175.00

C1500:  $7,265.00

C2000:  $7,835.00

 

W1000:  $8,975.00

W1500:  $12,100.00

W2000:  $12,630.00

Posted in Uncategorized, What's New | Comments closed

Used Holz-Her Cut 70, 10′ x 10′ CNC Horizontal Beam Saw

Used Holz-Her model Cut 70, 10′ x 10′ CNC horizontal beam saw, SN 6/0-509 5004403, year 2007, 3100mm (10′) cutting length x 3100mm (10′) pull back of parts, 70mm (2.75″) cutting height, saw carriage runs on linear guideways, 15HP main saw motor, 1.5HP scoring saw motor, 350mm (14″) main saw blade diameter, 180mm scoring saw diameter, 1-70m/m (230fpm) saw carriage speed – forward and reverse, 70m/m (230fpm) saw carriage return speed, forward speed is variable, automatic blade height adjustment, three 1800mm x 600mm air flotation tables, four 120mm (4.75″) dust extraction ports, (5) grippers, rack and pinion movement of gripper carriage, 1300mm infeed alignment fence on left side of machine, cross-cut alignment device, PC computer control, Windows-based operating system, 15″ color monitor, on-board optimization software, label printer with label printing software, two sets of tooling, safety enclosure, 230v 3-phase, original manuals, one owner, cleaned and checked.

Stock #217050

SPECIAL PRICE:  $26,950.00

Posted in Uncategorized, What's New | Comments closed

Loewer “DiscMaster”3DBB De-Nibbing & Brushing Sander

Loewer model “DiscMaster” 3DBB de-nibbing and brushing sander, SN 10810, year 2006, 480v 3-phase 47amps, 53″ maximum working width, 4″ maximum thickness of workpiece, configured as follows:

Disc Station:  (16) 10″ discs, each with 24 keyways, 75mm (3″) long, (2) 1.5KW gear motors, variable disc speed 50-300RPM by frequency converter, eccentric orbital disc movement, separate height adjustment of the disc station (to run discs only or rollers only or everything together)

Rotating Roller Spindles:  (2) 2″ diameter spindles, 90-degrees to the feed with 16″ diameter brushes, (2) 2.2KW (3HP) gear motors, variable speed 14-300RPM by frequency converter, each spindle has independent speed control, spindles are counter-rotating

Basic Machine:

  • (4) spring-loaded hold-down rolls
  • vacuum bed – vacuum blower 7.5KW (10HP)
  • 2HP feed motor, 3-15mpm variable feed speed
  • constant passline
  • motorized height adjustment
  • electronic display showing thickness of work piece
  • sensor activated pneumatic oscillating
  • blow-off device for cleaning at the end of machine
  • control panel at upper left side
  • emergency safety shut-off cord at infeed and outfeed
  • over-thickness shut-off device
  • all doors have disconnect switches
  • dust hoods (3) x 3.2″ diameter, (4) x 5.6″ diameter, (1) x 8″ diameter
  • high quality dust collection manifold, all original documentation, one owner, can be seen under power (Boston, MA area), in excellent running condition, weight 1900kgs

Price:  $39,900.00

 

Posted in Uncategorized, What's New | Comments closed

Holz-Her PRO-MASTER 7123K CNC Machining Center

Holz-Her PRO-MASTER model 7123K 4′ x 10′ CNC pod and rail machining center, SN 106, year 2007, tool carriage consists of 21HP liquid-cooled inverter controlled router, c-axis installed, 16 vertical boring spindles – 8 in y-axis and 8 in x-axis, 4-spindle horizontal boring head, 2 sets of opposing spindles in x-axis, 12-position rotary covered tool changer, HSK tool holders, 2 lasers attached to tool carriage for pod positioning, 6 consoles, 4 of which have pnumatic panel lifting blades, approximately 24 vacuum pods, x-axis drive is rack and pinion, y-axis drive is ball screw, full length safety mats, each console has front and rear locating pins, four additional pins on left and right side, 4-zone, remote hand held control, main frame has 6 support legs, PC control with color screen, “Campus” onboard operating system, transformer for 3-phase 220v connection, combined vacuum pump and liquid cooling unit for spindle, can be seen under power, all support documentation, in excellent running condition.

Price:  $39,900.00

Posted in Uncategorized, What's New | Comments closed

Hess HS300 German-Made Lift Tables

Hess Series HS300 German-made mobile lift tables, use for loading/tailing machines, transporting, stacking, leveling, etc.  They go everywhere via large diameter locking casters.  Needs no external power connection (up/down foot pump)

Hess HS300 STANDARD lift table:  $2,395.00 each

  • top metal plate 1000x600mm (30.37×23.62″)
  • minimum height 400mm (15.74″)
  • stroke 610mm (24″)
  • weight 165lbs
  • load capacity 660lbs
  • 4 casters, 2 with brakes

Hess HS300 LARGE lift table:  $3,995.00 each

  • top metal plate 2000x840mm (78.74×33″)
  • minimum height 400mm (15.74″)
  • stroke 610mm (24″)
  • weight 422lbs
  • load capacity 660lbs

hess-lifting-table

Posted in Uncategorized, What's New | Comments closed

Timesavers 1311-13-1 Single Head 37in Wide Belt Sander

Timesavers model 1311-13-1, 37″ single head conveyor feed wide belt sander, SN 29658, year 2004, 15HP 3-phase 230v sanding head motor, 1HP variable speed feed, 15-45 fpm, 4″ spiral-grooved rubber contact drum followed by independently adjustable platen, 37″ x 60″ abrasive belt size, double infeed and outfeed spring-loaded hold-down rolls, electronic belt tracking, safety shut-off gate, load meter, shaving hood has 6″ diameter inlet, four jack screws on conveyor bed, power raise and lower, four safety shut-off controls, mechanical digital readout on opening of bed, 42 maximum amp load at 230v, four leveling bolts, operation manual, cleaned and checked.

Price:  $11,900.00

1311 6 1311 5 1311 4 1311 3 1311 2 1311 1

Posted in Uncategorized, What's New | Comments closed

State-of-the-Art Dust Collection System Installation at Troy Cabinet

Please view the latest installation of a new Donaldson Torit state-of-the-art model VH2-8 “Power Core” high efficiency dust collector.

This system, which is powered by a 30HP blower and is rated at 10,000CFM capacity, represents Donaldson Torit’s latest technology utilizing “Ultra Web Filter Packs.”  Donaldson’s “Delta P Plus” filter cleaning control system senses pressure drop at the point of filtration and will initiate the air pulse cleaning cycle at any time during operation to reduce energy cost and compressed air consumption.  The system also utilizes the dumpster hopper option for ease of dust and shaving removal.  The noise level is extremely low and the external system is equipped with a  summer/winter damper to keep the ambient shop temperature comfortable all year round.

Boshco, Inc. managed all aspects of this project, including initial design and duct work layout and installation of all internal and external duct work connections.

Please contact us for a customized proposal for a new system for your shop (978) 667-1911 or contact@boshco.com

Credits:

Customer:  Troy Cabinet in Troy, NY

Owner:  John DeCurtis (in photo on left)

Production Manager:  Ray Weeks (in photo on right)

Dust Collector:  Donaldson Torit model VH2-8 “Power Core” dust collector

Internal Duct Work:  Kirk & Blum

External Duct work:  H & H Sheet Metal

Duct Work Installation:  Dust Collection Works (Jim Hall)

Management:  Boshco, Inc.

Posted in Uncategorized, What's New | Comments closed

Dustek Heavy Duty Plastic Dust Collection Bags

The Dustek Division of Boshco, Inc. is one of the largest suppliers of heavy duty plastic collection bags in the United States.  We maintain a huge inventory of this product, and we ship nationwide every day via UPS.

Bags are sold in rolls of (50) and fit all Dustek (or similar) dust collectors with a 24″ diameter barrel, 72″ long x 6mil. thickness.  Part number is 01-010, price $135.00 per roll.

Please call Jenny Boshco at (978) 667-1911, fax (978) 671-0011 or email jboshco@boshco.com to place your order.  All orders placed before 2pm Eastern Time will ship that day.  Please ask about discounts for orders of 10 or more rolls.

Posted in Uncategorized, What's New | Comments closed

Cantek Model D405AE Sliding Table Saw

We are pleased to offer the new Cantek Model D405AE 1-axis 10′ sliding table tilting arbor, scoring panel saw. This machine, with great “fit and finish,” is equipped with a programmable rip fence having a maximum cutting width of 51″ by means of a precision ball screw. The adjustable overhead control panel will also display the angle of motorized tilt and control the motorized raise and fall of the blade. With a comprehensive standard equipment package this machine is priced very reasonably at $13,660.00 complete!

Please view the “Nickel video” of this machine on our YouTube link.

Posted in Uncategorized, What's New | Comments closed

Holytek HS-625M-CE Heavy Duty Single Spindle Shaper

IN STOCK AND ON SALE!

The new Holytek model HS-625M-CE heavy duty single spindle shaper is equipped with:

  • 7.5HP, 3 phase, 220v motor with electronic brake
  • Spindle reversible rotation with double-locked spindle
  • 1-1/4″ and 3/4″ MK5 taper interchange spindles
  • 42″ x 32″ table size
  • 3,000, 4,500, 6,000 and 10,000 spindle speeds
  • Mitre gauge
  • 3 table inserts
  • Precision fence with dust hood and mechanical digital readouts on left and right fence sections
  • Built to “CE” safety regulations
  • Scales in inches
  • Router bit spindle with 1/2″ collect
  • With tool kit and operation manual

 

List Price:  $6,895.00

ON SALE NOW FOR $6,250.00

 

 

Posted in Uncategorized, What's New | Comments closed