Sales • Service • Support • Knowledge
Liquidations • Integrity • Since 1941

 

Equipment Categories

Parts and Supplies

Cantek MX340 Automatic Edgebander
[...

Cantek MX340 Automatic Edgebander
[MX340]
 $15,690.00 

The MX340 from Cantek is designed to be a compact, and durable edgebander offered at an affordable price. This machine is equipped with end trimming, flush trimming, PVC scraping, and buffing.  User friendly controls and adjustments allow for efficient changeovers of edge tape thicknesses between 0.4mm & 3mm.

 

FEATURES

·         PLC control system with LED display and keypad

·         Work-piece is fed by chain

·         Edge coil support plate: Ø 800 mm, for PVC/ABS

·         Edge feeding is Automatic edge feeding with a thickness capacity of 0.4–3 mm; strip material can be hand-fed

·         Coiled edge bands up to 3 mm in thickness in Hard-PVC/ABS are cut with guillotine shears.

·         Teflon-coated hot-melt glue pot

·         Spring loaded pressure unit with (2) pressure rollers

·         High frequency 12000 RPM end trimming unit, with Ø100 mm TC-Saw blades

 

 

 

FEATURES (Cont’d)

·         High frequency 12000 RPM top & bottom trimmers with insert knife cutters for radius trimming & bevel trimming

·         Radius scraper with 2mm radius

·         3000 RPM top & bottom buffing units

·         Heavy duty pressure beam with extendable work-piece support

·         Heated infeed fence for pre-heating the panel for optimum glue penetration

 

SPECIFICATIONS

Feeding speed                              29.5 FPM                          9 m/min.

Panel thickness                             0.315~1.77”                       8~45 mm

Edge thickness                             0.0158”~0.118”                 0.4 ~ 3 mm

Min. panel width                            4”                                       100 mm

Min. panel length                           4”                                       100 mm

Working table height                     33.5”                                  850 mm

Dust collection outlet dia.              (5”)                                    127 mm

Total connected power                 7.4 HP                               5.5 KW

Machine dimensions (LxWXH)     116” x 26” x 54”                2950 x 660 x 1370mm

Machine weight                             1144 lbs.                            520 kgs

Shipping dimensions (LxWxH)     89” x 27 ½” x 65 ¾”          2260 x 700 x 1670mm

Shipping weight                             1276 lbs.                            580 kgs

Voltage                                          230/3/60                            230/3/60

Electrical requirement                   30 amps (Voltage must be +/- 5%)

 

MOTOR SPECIFICATIONS

Feeding motor                               1 HP                                  0.75 (kW)

Glue spindle motor                        ¼ HP                                 0.18 (kW)

Front/rear trimming motor            0.3 HP                               0.22 (kW)

Upper trimming motor                  ½ HP                                 0.37 (kW)

Lower trimming motor                  ½ HP                                 0.37 (kW)

Upper buffing motor                     0.16 HP                             0.12 (kW)

Lower buffing motor                     0.16 HP                             0.12 (kW)

Pre-heating                                   ½ HP                                 0.4 (kW)

Glue pot                                        1 ¾ HP                              1.315 (kW)

This product was added to our catalog on Monday 07 August, 2017.
Request a Quote

 

Distributing Nationwide

Dustek UWME SawStop Used Machines Under 5K